J JRC Commercial Refrigeration
Boring, OR · 97009 Licensed · Insured · 24/7

Walk In Freezer Repair in Boring, OR Near Me

Walk in freezer repair in Boring, OR. Freezers running above zero, iced coils, failed defrost and compressor faults repaired by JRC. Call (855) 778-2092.

EPA Certified Technicians
Insured and Bonded
24 Hour Emergencies
Parts On The Truck
Written Quotes

Freezers fail differently from coolers because ice is involved in both the problem and the symptom. A walk in freezer in Boring, OR that has climbed above zero usually has a defrost fault, a low charge, or an evaporator so iced up that no air is moving across it.

JRC technicians thaw the coil properly rather than chipping at it, then find why it iced in the first place. Defrost heaters open circuit, termination thermostats drift, timers stop advancing, and door gaskets let warm humid air in that turns straight to frost. Fixing the ice without fixing the cause means we are back in three weeks, and neither of us wants that.

How it works

Refrigeration repair in four steps

01

Tell us what is running warm

Give us the equipment type, the temperature it is holding and where you are in Boring, OR.

02

Get a written quote

An EPA certified technician confirms the fault and the price before any work starts.

03

Same day where possible

Most repairs are booked same day, with common parts already on the truck.

04

Fixed and verified

We check the box pulls down to temperature and holds it before the technician leaves.

Service coverage

Commercial Refrigeration Repair Across Boring, OR

Same day service available throughout Boring, OR and nearby ZIP codes.

Neighborhoods we cover for Commercial Refrigeration Repair

  • Downtown Boring
  • Boring-Damascus

ZIP codes we serve

97009
Walk In Freezer Repair in Boring, OR

Walk In Freezer Repair FAQs

Frequently asked questions about Walk In Freezer Repair

Questions we hear most often about Walk In Freezer Repair in Boring, OR.

Talk to a real person
My walk in cooler is running warm. What should I do right now?
Keep the door shut, move your highest value product to a working box, and start a written temperature log immediately. That log is what your insurer will ask for if you end up making a spoilage claim, and nobody thinks to start one until it is too late.
My ice machine makes thin cloudy cubes. Is it broken?
Usually it is scaled rather than broken. Mineral buildup insulates the evaporator plate, so cubes come out thin, cloudy or stuck, and production drops well before the machine quits. A descale and clean fixes most of these, and water filtration stops it returning.
Is a compressor replacement worth it or should I replace the unit?
It depends on the age of the equipment and what killed the compressor. A burnout contaminates the system with acid and adds flushing, drier replacement and a proper evacuation to the job. On an older unit, or one on a phased down refrigerant, a new condensing unit often costs less overall. We will price both.
Why is my prep table failing health inspection when the cabinet is cold?
The rail is cooled by air moving under the pans, and that is a separate problem from the cabinet below. Overfilled pans, a missing divider, a lid left open or a blocked evaporator will all push the top rail into the danger zone while the display underneath reads perfectly fine.
Do you work on equipment you did not install?
Yes, that is most of what we do. We service walk ins, reach ins, ice machines, display cases and condensing units from all the common manufacturers, including systems that have been repaired piecemeal by several companies over the years.

Ready when you are

Cooler Down In Boring, OR? Call now.

Walk in coolers and freezers, ice machines, display cases, compressors and refrigerant leaks repaired by EPA certified technicians. Written quotes, 24 hour response. Call (855) 778-2092.

Call (855) 778-2092 Services